Technical Date of Fiberglass Duct Rodder
Rod Diameter (mm) Φ 4.5-Φ 16
Rod Length (m) 30m~500m
Frame Spec. (mm)
Material: Fiber glass rod inner, Extruded by fiber glass and high
strength resin at high temperature
Fiber glass rod outer, High Density polyethylene coating
Metal Frame: Steel with high-temperature sprayed plastic or hot dip
Fiber glass content:75-80%
Density > 1.9gr/cm3
Working environment-40° C to +80° C
Minimum Pulling strength 4000N +/-5%
Consistency of rod 137gr/m
Flexural Modulus > 46.500Mpa
Elongation at break 2.5-3%
Min Bending Radius 388mm
Fiberglass duct rodder features
1.Light weight,durable,resistance to acid,alkali,aging
2.High tensile strength and bending properties to make it go
through narrow pipes easily.
3.Good temperatures adaptability, it will not soften in hot weather
nor become brittle in cold weather, its usability will not be
affected by temperature.
4.Its outer protected layer is made of high density ABS resin,
which has good anti-UV capability, the advantage of smooth,
wear-resistant and long service life.
5.There are meter marks on the rod for the user easily read it. The
marks is waterproof, ultraviolet and it can be still clear even
after using long time.
6.The reel is equipped with brake device,the rotating or stopping
of the rod can be easily realized just by turning hand.
7.It has the tilting type handle, convenient for pushing and
8.It has roller and ring on the top and bottom used for the
convenience of duct rodder going through, protect the cover from
The outside layer is smooth and firm ABS resin. It is widely used
for the cables works or cleaning in cable pipe or channels. It has
the advantages of time saving,reducing effort, improving efficiency